Fusion Splicer OFS-90

ShinewayTech® OFS-90 series optical fiber fusion splicer is designed with high-speed image processing technology and special precision-positioning technology. It will automatically finish the whole fiber fusion process in 9 seconds by fast mode, and splice loss is lower than 0.02dB for single mode fiber. 3.5 -inch LCD , dual CMOS monitors, X and Y axis separately display or simultaneously display, thus different fusion stages can be showed clearly. It is compatible with ITU-T SM/MM/DS/NZDS/ED fiber, and is equipped with 4-in-1 holders and SOC adapter.

OFS-90 has small volume, light weight, AC/DC power supply and 150+ splicing and heating circles, so it is particularly suited to telecommunications, radio and television, railway, electric power, military,  research institutes for optical fiber communication construction and maintenance. OFS-90 is perfect for FTTH installation and maintenance.

Hardware Structure Design Feature:

  • High strength portable straps design is convenient for hanging and operating
  • Splice Loss: SMF/BIF: ≤0.02dB(typ.); MMF: ≤0.01dB(typ.); DSF/NZDSF/EDF: ≤0.04dB(typ.)
  • Four motors, special precision-positioning technology
  • Double V-groove design
  • Display screen can be flip before and after, can conveniently multi-angle observe
  • Inner light make the operation environment in the dark
  • High precision 4-in-1 holder (250μm/900μm/patch cord/FTTx indoor fiber etc), SOC holder
  • Compact and convenient: 1.5kg with battery
  • Unique battery and the host separation design, convenient maintenance and replacement of the battery
  • Wind, sand and dust prevention, waterproof, aseismatic design adapt to the outdoor environment

Software Design Feature:

  • Ready-package battery with electric quantity indicator, convenient carrying and change
  • ≤9s splicing time, ≤36s heating time (adjustable)
  • Between X/Y single screen and X&Y easily switch
  • Auto checks fiber end-face, calibrate position of splicing, calculate splicing loss and temperature and pressure compensation so on
  • Auto splice, auto arc optimization, auto heating
  • 3 hours fast charge
  • Built-in counter to warn replace electrode

OFS-90 Holders

High precision 4-in-1 holder design exquisitely, operate conveniently, can hold 250μm, 900μm, 3mm patch cord and FTTx indoor fiber.

OFS-90 General Fixed Hole On The Base





3.5 inch Color LCD,  X/Y / X / Y, Auto turn-over




1.2kg (without battery) / 1.5kg(with battery)

Fiber Type

SMF(ITU-T G.652), MMF(ITU-T G.651), DSF(ITU-T G.653), NZDSF(ITU-T G.655), BIF(ITU-T G.657), EDF

Fiber Material


Fiber Count


Cladding Diameter


Coating Diameter


Fiber Cleave Length

8 ~ 16mm (Coating diameter: 0~250µm); 16mm (Coating diameter: 250 ~ 1000µm)

Sleeve Length


Splice Mode

Arcing / 60 modes

Splice Loss Evaluation


Fiber Check

Fiber cleaving angle / axis offset / loss / fiber alignment / focus etc.


5,000 splices /100 screenshots

Tension Test


Electrode Life

5000 arcs

V-groove Illumination

White LED

Splice Loss

SMF/BIF 0.02dB(typ.)/ MMF0.01dB(typ.) / DSF/NZDSF/EDF 0.04dB(typ.)

Return Loss


Splice Time

9 seconds

Boot Time

5 seconds


Auto heating / 36 seconds (Typical, 0240s adjustable) / 20 modes

Battery Sustainability

150+ (splice + heating) circles

Imaging System

Dual CMOS cameras, 200x zoom

Power Saving

Auto screen / power off (Adjustable)

Power Supply

4400mAhLithium Battery

AC/DC Power Adapter (50/60Hz) 110~240V, DC14.5~15V



Working Condition

-25℃~50 / -30 ~ 70 (Working / Storage), Humidity: 090%(Non-Condensing)

Altitude: 0~5000m,Wind Speed 15m/s